- A. Karmakar, M. Ghosh, D. Chakrabarti, “Cold-rolling and inter-critical annealing of low-carbon steel: effect of initial microstructure and heating-Rate”, Materials Science & Engineering A, Vol. 564 (2013), pp. 389–399.
- A. Karmakar, A. Karani, S. Patra, D. Chakrabarti, “Development of bimodal ferrite-grain structures in low-carbon steel using rapid intercritical annealing”, Metallurgical and Materials Transactions A, Vol. 44A (2013), pp. 2041-2052.
- A. Karmakar, D. Chakrabarti, “Comparison between conventional annealing and rapid-transformation annealing of low-carbon steel’, International Journal of Metallurgical Engineering, Vol. 2 (2) (2013), pp. 137-141.
- A. Karmakar, R. D. K. Misra, S. Neogy, D. Chakrabarti, “Development of ultrafine-grained dual-phase steels: mechanism of grain refinement during intercritical deformation”, Metallurgical and Materials Transactions A, Vol. A 44 (9) (2013), pp. 4106-4118.
- A. Karmakar, S. Sivaprasad, S. K. Nath, R. D. K. Misra, D. Chakrabarti “Comparison between different processing schedules for the development of ultrafine-grained dual-phase steel”, Metallurgical and Materials Transactions A, Vol. 45 (5) (2013), pp. 2466-2479.
- A. Karmakar, R. D. K. Misra, S. Neogy, D. Chakrabarti “ Development of ultra-fine grained dual-phase steels: mechanism of grain refinement during inter-critical deformation”, Materials Science Forum, Vol. 783 (2014), pp. 674-678.
- A. Karmakar, S. Sivaprasad, S. Kundu, D. Chakrabarti, “Tensile behavior of ferrite-carbide and ferrite-martensite steels with different ferrite grain structures”, Metallurgical and Materials Transactions A, Vol. 45 (4) (2013), pp. 1659-1664.
- A. Karmakar, S. Kundu, S. Roy, S. Neogy, D. Srivastava, D Chakrabarti, “Effect of microalloying elements on austenite grain growth in Nb-Ti and Nb-V steels”, Materials Science and Technology, Vol. 30 (6) (2014), pp. 653-664.
- S. Roy, A. Karmakar, S. Mukherjee, S. Kundu, D. Srivastava, D. Chakrabarti “Effect of starting microstructure on austenite grain sizes developed after reheating of HSLA steel”, Materials Science and Technology, Vol. 30 (10) (2014), pp. 1142-1153.
- A. Karmakar, M. Mandal, A. Mandal, MB Sk, S. Mukherjee, D. Chakrabarti “Effect of starting microstructure on the grain refinement in cold-rolled low-carbon steel during annealing at two different heating rates”, Metallurgical and Materials Transactions A, Vol. 47 (1) (2016), pp. 268-281.
- C. Halder, A. Karmakar, Sk. Md. Hasan, D. Chakrabarti, M. Pietrzyk, N. Chakraborti “Effect of carbon distribution during the microstructure evolution of dual phase steels studied using cellular automata, genetic algorithms and experimental strategies”, Metallurgical and Materials Transactions A, Vol. 47 (12) (2016), pp. 5890-5906.
- A. Karmakar, P. Sahu, S. Neogy, D. Chakrabarti, R. Mitra, S. Mukherjee, S. Kundu “ Effect of cooling rate and chemical composition on microstructure and properties of naturally cooled vanadium-microalloyed steels”, Metallurgical and Materials Transactions A, Vol. 48 (4) (2017), pp. 1581-1595.
- A. Karmakar, S. Biswas, S. Mukherjee, D. Chakrabarti, Vinod Kumar “ Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation and strengthening of Nb-microalloyed steel”, Materials Science & Engineering A, Vol. 690 (2017), pp. 158–169.
- A. Karmakar, S. Mukherjee, S. Kundu, D. Srivastava, R. Mitra, D. Chakrabarti “Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels”, Materials Characterization, Vol. 132 (2017), pp. 31– 40.
- A. Karmakar, M. Mandal, D. Chakrabarti “Development of different novel microstructures in low-carbon steel by thermomechanical processing and their properties”, IIM Metal News, Vol. 20 (7) (2017), pp. 12-19.
- A. Mandal, A. Karmakar, D. Chakrabarti, C. Davis “Effect of alloying and coiling temperature on the microstructure and bending performance of ultra-high-strength strip steel”, Metallurgical and Materials Transactions A, Vol. 49 (12) (2018), pp. 6359-6374.
- A Bhattacharya, A. Karmakar, A. Karani, M. Ghosh, D. Chakrabarti “Processing of ultrafine-grained steels by warm rolling and annealing”, Journal of Materials Engineering and Performance, Vol. 28 (2) (2019), pp. 753-768.
- R. Pradhan, A. Karmakar, M. Ghosh, D. Chakrabarti, S. Mukherjee "Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel", SN Applied Sciences, Vol. 1(7) (2019), pp. 663.
- A. Karmakar, K. Barat "Effect of elasto-plastic compatibility of grains on void-initialtion criteria in low-carbon steel", Philosophical Magazine Letters, Vol. 99(7) (2019), pp. 261-273.
- M Sinha, A Karmakar, B Syed, S Ghosh, “Effect of Austenite Conditioning on Martensitic Transformation in Commercial Grade Interstitial-Free Steel ” Metallurgical and Materials Transactions A 51, (2020) 3435-3446.
- M Sinha, B Syed, A Karmakar, S Ghosh, “Diffusional and displacive transformations in interstitial-free steel within the scope of a critical assessment of the mechanical property”, Materials Science and Engineering: A 787, (2020) 139519.
- K U Yazar, S Mishra, A Karmakar, A Bhattacharjee, S Suwas, “On the temperature sensitivity of dwell fatigue of a near alpha titanium alloy: role of strain hardening and strain rate sensitivity”, Metallurgical and Materials Transactions A 51 (10), (2020) 5036-5042.
- K Bharath, A Mandal, A Karmakar, AK Khanra, MJ Davidson, “Understanding the effect of hot extrusion on the evolution of microstructure and associated mechanical properties in sintered Al-Cu-Mg alloys”, Materials Characterization 170, (2020) 110715.
- R Rana, D B Karunakar, A Karmakar, “Influence of Different Tool Profiles and Process Parameters on Mechanical Properties of Dissimilar AA6061 and AA7075 Aluminium Alloys by Friction Stir Welding”, Advances in Engineering Design, (2021) 201-207.
- S Kumar, A Karmakar, SK Nath, “Construction of hot deformation processing maps for 9Cr-1Mo steel through conventional and ANN approach”, Materials Today Communications 26, (2021) 101903.
- C Kadgaye, SM Hasan, S Patra, M Ghosh, SK Nath, A Karmakar, “Role of Cerium on Transformation Kinetics and Mechanical Properties of Low Carbon Steels”, Metallurgical and Materials Transactions A 52 (A), (2021) 3978-3995.
- S Kumar, A Karmakar, SK Nath, “Comparative Assessment on the Hot Deformation Behaviour of 9Cr–1Mo Steel with 1Cr–1Mo Steel”, Metals and Materials International 27 (10), (2021), 3875-3890.
- P Modak, A Mandal, R Gupta, A Karmakar, SK Sarkar, S Ahlawat, Arunansu Haldar, Rahul Mitra, Suman Neogy, Aniruddha Biswas, Debalay Chakrabarti, “Phenomenal Effect of Stable (Ti, Mo) C Nano-Sized Precipitates in Retarding the Recrystallization and Grain Growth in High-Strength Ferritic Steel”, Metallurgical and Materials Transactions A 53 (2), (2022) 689-705.
- K Barat, A Ghosh, A Doharey, S Mukherjee, A Karmakar, “Crystallographic evaluation of low cycle fatigue crack growth in a polycrystalline Ni based superalloy”, International Journal of Plasticity 149, (2022) 103174.
- NK Paraye, A Karmakar, PK Ghosh, S Das, “Surface modification by in-situ grown TiC in the bainitic matrix using TIG arcing”, Materials Science and Technology, (2022) 1-15.
- C Kadgaye, S Godase, A Karani, K Barat, D Chakrabarti, A Karmakar, “Correlating in-plane strength anisotropy with its microstructural counterpart for a hot rolled line pipe steel”, International Journal of Pressure Vessels and Piping 199, (2022) 104753.
- SP Neog, A Lodh, A Karmakar, AG Nair, A Dasgupta, SD Bakshi, S Das, “Insights into the stability of retained austenite during wear”, Philosophical Magazine, (2023) 1-20.
- VB Vukkum, T Ray, A Karmakar, S Das, "Microstructure-Texture-Mechanical Property Correlation in Laser-Welded Dual-Phase and Interstitital-Free Steel Blanks", Journal of Materials Engineering and Perforrmance, (2023) 1-12.
- A Sarkar, P Modak, A Mandal, D Chakrabarti, A Karmakar, "Correlation between Microstructure and Tensile Properties of Low-Carbon Steeel Processed via Different Thermomechanical Routes", Journal of Materials Engineering and Perforrmance, (2023) 1-15.